Viking DrawerMicro Designer DMOD240SS Install Manual
  1. Manuals
  2. Brands
  3. Viking Manuals
  4. Microwave Oven
  5. DrawerMicro Designer DMOD240SS
  6. Install manual
Viking DrawerMicro Designer DMOD240SS Install Manual

Viking DrawerMicro Designer DMOD240SS Install Manual

Viking range designer dmod240ss: install guide
Hide thumbs Also See for DrawerMicro Designer DMOD240SS:
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

Download this manual See also: Use and Care Manual

installation instrUctions

IMPORTANT - PLEASE READ AND FOLLOW
• InstallatIon and servIce must be performed by a qualIfIed Installer.
• the Installer should leave these InstructIons wIth the consumer who should retaIn for local
Inspector's use and for future reference.
• for SAFETY CONSIDERATIONS do not Install drawer In any combustIble cabInetry, whIch Is not In
accord wIth the stated clearances and dImensIons on page 2, see fIgure 1.
Unpacking yoUr
DrawerMicro oven
remove all packing materials from inside the drawermicro
oven. do not remove the waveguIde cover,
which is located on the top of the appliance.
Oven Cavity
remove the feature sticker, if there is one. check the
drawer for any damage, such as misaligned or bent drawer,
damaged drawer seals and sealing surfaces, broken or
loose drawer guides and dents inside the cavity or on
the front side of the drawer. If there is any damage, do
not operate the appliance and contact your dealer or a
vIKIng authorIZed servIcer.
iMportant notes to the
installer
• read all of the Installation manual before installing the
drawermicro oven.
• remove all packing material before connecting the
electrical supply.
• observe all governing codes and ordinances.
• be sure to leave these instructions with the consumer.
DrawerMicro
Sealing Surface
Waveguide Cover
Oven
™
iMportant notes to the
consUMer
Keep this manual with your use and care manual for future
reference.
• as when using any microwave oven generating heat,
there are certain safety precautions you should follow.
these are listed in the use and care manual. read all
and follow carefully.
• be sure your drawermicro oven is installed and
grounded properly by a qualified installer or service
technician.
iMportant safety
instrUctions
WARNING: If the information in this manual is not
followed exactly, a fire or electrical shock may result that
could cause property damage, personal injury or death.
WARNING: to reduce the risk of tipping, the drawermicro
oven must be secured by a properly installed anti-tip
block.
• this appliance must be electrically grounded in
accordance with local codes.
• make sure the wall coverings and the cabinets around
the drawermicro oven can withstand the heat
generated by the appliance.
WARNING: never leave children alone or unattended
in the area where a appliance is in use. never leave the
drawer open when the microwave is unattended.
WARNING: stepping, leaning or sitting on the drawer
may result in serious injuries and can also cause damage
to the appliance.
• Do not use the DrawerMicro Oven as a storage
space. this creates a potentially hazardous situation.
• check that the time-of-day is in the display. If not, touch
Stop/Clear to prevent unintended use.

Advertisement

Table of Contents
loading

Related Manuals for Viking DrawerMicro Designer DMOD240SS

Summary of Contents for Viking DrawerMicro Designer DMOD240SS

  • Page 1: Installation Instructions

    • observe all governing codes and ordinances. • be sure to leave these instructions with the consumer. DrawerMicro Oven ™ iMportant notes to the consUMer Keep this manual with your use and care manual for future reference. • as when using any microwave oven generating heat, there are certain safety precautions you should follow. these are listed in the use and care manual. read all and follow carefully. • be sure your drawermicro oven is installed and grounded properly by a qualified installer or service technician. iMportant safety instrUctions...

  • Page 2: Clearances And Dimensions

    FIGUREs 1 and 2 contain many DrawerMicro Oven measurements for reference when planning the drawer’s location. • check location where the drawermicro oven will be installed for proper electrical supply. • your appliance can be built into a cabinet or wall by itself or under a gas or electric wall oven. • be sure that the clearance of the floor between the wall oven and the drawermicro oven is a minimum of 2". • the microwave interior will easily accommodate a 9" x 13" oblong dish or a bag of microwave popcorn. (6") Anti-Tip block " " to bottom Allow "...

  • Page 3: Anti-Tip Block

    anti-tip Block NORMAL INSTALLATION STEPS ANTI-TIP BLOCK INSTALLATION INSTRUCTIONS Electrical Outlet to reduce the risk of tipping of the drawer, the anti-tip block must be properly installed located 14 the floor on which the appliance will sit. the 6" anti-tip block must be provided by the installer. see fIgure 1. the anti-tip block prevents serious injury that might result from spilled hot liquids. If the drawermicro oven is ever moved to a different location, the anti-tip block must also be moved and installed. when installed to the wall, make sure that the screws completely penetrate the dry wall and are secured in wood or metal so that the block is totally stable. when fastening, be sure that the screws do not penetrate electrical wiring or plumbing.

  • Page 4: Grounding Instructions

    Do not use an extension Grounding Pin cord. care, cleaning anD Maintenance refer to the use and care manual for cleaning instructions. VIKING RANGE CORPORATION 111 Front street Greenwood, Mississippi 38930 UsA (662) 455-1200 MoDel anD serial nUMBer location the name plate, including model and serial number, is located on the faceplate behind the drawer front.

  • Page 5: Instrucciones De Instalación

    instrUcciones De instalaciÓn IMPORTANTE - LEA Y SIGA LAS INSTRUCCIONES • la InstalacIÓn y el servIcIo deben ser realIZados por un Instalador calIfIcado. • el Instalador debe devolver estas InstruccIones al clIente quIen debe conservarlas para uso del Inspector local y para referencIas futuras. • por cuestIones de segurIdad no Instale la gaveta en armarIos Inflamables que no cumplan con los espacIos lIbres y dImensIones establecIdos en la pÁgIna 2, vea la fIgura 1. DeseMBalaJe De sU horno DrawerMicro retire todos los materiales de embalaje que están dentro de la gaveta. no retIre la cubIerta de la guÍa de ondas, ubicada en la parte superior del horno drawermicro.

  • Page 6: Espacios Libres Y Dimensiones

    espacios liBres y DiMensiones • check that the time-of-day is in the display. If not, touch Stop/Clear to prevent unintended use. • las dimensiones mostradas en la figura deben ser utilizadas. las dimensiones suministradas proporcionan un espacio libre mínimo. ubique el tomacorriente eléctrico en el área cubierta en la esquina superior izquierda del recorte. vea la fIgura 4. • la superficie de contacto debe ser firme y nivelada. preste mucha atención a la superficie o piso en el cual se apoyará el horno drawermicro. la superficie o piso de la abertura debe ser construido de madera laminada...

  • Page 7: Bloque Antivolcaduras

    BloQUe antivolcaDUras PROCEDIMIENTO NORMAL DE INSTALACIÓN INSTRUCCIONES DE INSTALACIÓN DEL BLOQUE ANTIVOLCADURAS para reducir el riesgo de volcadura de la gaveta, el bloque antivolcaduras debe ser instalado correctamente a una distancia de 14 " por encima de la superficie Ubicación del en la cual se apoyará el horno drawermicro. el bloque tomacorriente eléctrico antivolcaduras de 6" debe ser suministrado por el instalador. vea la fIgura 1. el bloque antivolcaduras previene lesiones graves que podrían ser ocasionadas por...

  • Page 8: Instrucciones De Conexión A Tierra

    Clavija de tierra no use un cable de extensión. VIKING RANGE CORPORATION 111 Front street Greenwood, Mississippi 38930 EE.UU. (662) 455-1200 cUiDaDo, liMpieZa y ManteniMiento consulte el manual de uso y cuidado para ver las instrucciones de limpieza.

  • Page 9: Manuel D'installation

    ManUel D’installation IMPORTANT - S’IL VOUS PLAîT LIRE ET SUIVRE • l’InstallatIon et le servIce doIvent être effectuÉs par un technIcIen qualIfIÉ. • conserveZ ce manuel d’InstallatIon pour consultatIon ultÉrIeure par votre Inspecteur de servIce ÉlectrIque local. • pour des RAISONS DE SÉCURITÉ, n’InstalleZ ce tIroIr dans aucun genre de placard combustIble, nI aucun placard quI ne se conforme pas auX dImensIons et espaces IndIquÉs auX pages 2, consulteZ les fIgure 1. DÉBallage DU four DrawerMicro ™ retirez tout le matériau d’emballage du drawermicro n’enleveZ pas le couvercle du guIde d’ondes, qui se trouve sur le dessus du four drawermicro.
  • Page 10 • N’utilisez pas le Four DrawerMicro comme espace de rangement. cela pourrait provoquer des risques de blessure ou de dommages. JeUX et DiMensions • les dimensions illustrées en fIgure 1 devraient être utilisées. les dimensions indiquées donnent le jeu minimum. situez la prise électrique dans la zone tramée en haut et à gauche dans le découpé. consultez la fIgure 4.

  • Page 11: Bloc Anti-Basculement

    Bloc anti-BascUleMent ÉTAPES D’INSTALLATION HABITUELLES INSTRUCTIONS POUR L’INSTALLATION DU BLOC ANTIBASCULEMENT pour réduire le risque de basculement du tiroir, il faut installer le bloc antibasculement conformément aux Emplacement de la indications, 14 pouces au dessus du sol sur lequel le prise de courant électroménager sera posé. le bloc antibasculement six pouces doit être fourni par l’installateur. consultez les fIgure 1. le bloc antibasculement prévient des blessures sérieuses éventuelles dues au déversement de liquides...

  • Page 12: Instructions Pour La Mise À La Terre

    électrique. N’utilisez Broche de mise à la terre pas de rallonge. entretien, nettoyage et service consultez le manuel d’utilisateur pour des instructions sur le nettoyage. VIKING RANGE CORPORATION 111 Front street Greenwood, Mississippi 38930 UsA (662) 455-1200 eMplaceMent Des nUMÉros De MoDÈle et De sÉrie la plaque d’identité, incluant les numéros de modèle et de série, se trouve sur l’arrière de la face avant du four drawermicro.

This manual is also suitable for:

Drawermicro dmod241ss

Table of Contents