Download Print this page

Cabinet Or Wall Cutout; Electrical Outlet Location - Viking Designer DMOC205SS Installation Instructions

Professional series convection microwave built-in trim kit
Hide thumbs Also See for Designer DMOC205SS:

Advertisement

BASIC SPECIFICATIONS
Overall Width
Overall Height from
Bottom
Overall Depth from
Rear
Oven Interior
Cutout Width
Cutout Height
Cutout Depth
Electrical
Requirements
Max. Amp Usage
Approx. Shipping Wt. 60 lbs.

CABINET OR WALL CUTOUT

Provide an opening in the wall or cabinet as indicated in
illustration 1. The depth should be a minimum of 0-1/8"
(51.1 cm). The floor of the opening should be constructed
of plywood strong enough to support the weight of the
oven (about 100 lbs.) and should be level for proper
operation of the oven .
NOTE: While the proper functioning of the oven does not
require that the opening be enclosed (with sides, ceiling
and rear partition), this may be required by local code,
and it is suggested that the local code be checked for
any such requirement.

ELECTRICAL OUTLET LOCATION

Outlet should NOT be in the shaded area as indicated
on illustration 1. At the rear of the opening, provide a
3-pronged, polarized, electrical outlet, 115-10 volt AC,
15 amp or larger.
EXHAUST DUCT ASSEMBLY
1. Insert the edge of DUCT (B) into the hold lip of DUCT
(C). Secure together by using a SCREW (A) provided in
the kit. Remove the existing screw (#1) at upper right
rear of the oven and secure DUCT (C) with the screw
(#1) just removed from the oven. Secure DUCT (B) with
SCREW (A) through the duct and into the original screw
hole in the oven. See illustration .
Microwave Oven
VMOC05
4-5/8"
(6.5 cm)
14-7/8"
(37.7 cm)
19"
(48.3 cm)
Width
16-1/8"
(40.9 cm)
Height
9-5/8"
(4.4 cm)
Depth
16-1/8"
(40.9 cm)
Overall
1.5 cu. ft.
N/A
N/A
N/A
10VAC/60 Hz (UL)
117VAC/60 Hz (CSA)
1.55 KW
13.0 amps (UL)
1.5 KW
13 (CSA)
(7. kg)
Built-In Trim Kits
VMTK75/76
6-1/"
(67.3 cm) 9-1/"
0-3/16"
19-13/16"
0-3/16"
(50.9 cm)
(50.1 cm)
(50.9 cm)
Min.
5"
(63.5 cm)
Min.
18-1/"
(46.9 cm)
Min.
0-1/8"
(51.1 cm)
0.5 lbs. (9.3 kg)
0.5 lbs. (9.3 kg)
Illustration 1
5"
(12.7 cm)
24-1/2"
18-1/2"
(62.2 cm)
(47.0 cm)
20-1/8"
(51.1 cm)
25" (63.5 cm)
Illustration 2
DUCT B
SCREW A
SCREW A

VMTK305/306
VMTK365/366
(74.9 cm)
35-1/4" (89.5 cm)
19-13/16"
0-3/16"
(50.1 cm)
(50.9 cm)
N/A
N/A
N/A
N/A
 lbs.
* 1/4" (0.6 cm)
* 2-1/2"
(6.4 cm)
* For 27" kit only
DUCT C
#1
19-13/16"
(50.1 cm)
(10 kg)
11-1/2"
(29.2 cm)

Advertisement

loading

This manual is also suitable for:

Professional vmoc205Professional vmtk275Professional vmtk276Professional vmtk305Professional vmtk306Professional vmtk365 ... Show all