Maintenance And Servicing; Before Cleaning - Safescan 1450 User Manual

English
Maintenance & servicing
Dust and dirt may block the sensors of the machine and could end
up as well in the transport area of the coins. These dirt deposits
may lead to problems during transport and sorting of the coins. To
ensure reliable operation, the transport assembly and the sensors
of the device need to be cleaned regularly.

Before cleaning

ALWAYS, unplug the Safescan 1450 coin counter from the
mains outlet.
Removing the transport assembly
1. Slide the safety lock switch on the back to the 'open' position.
2. Grab the 2 hopper handles and pull them towards you.
3. Lift the cover from the device.
4. Press the transport assembly (the metal ring) downwards and
keep it pressed while you rotate the ring to the center position
(in between 1 and 2).
Note down if the ring was mounted in position 1 or 2.
5. Lift the ring.
More info, articles, tutorials and videos support.safescan.com
16
4