Advertisement
SAFESCAN 1200
CLEANING INSTRUCTIONS
1.
Switch off the machine and unplug it from the mains electricity supply.
2.
Remove the three screws from the top cover using a cross-head screwdriver.
3.
Remove the cover and disconnect the cable that connects the cover to the machine.
4.
Clean all 16 counting sensors located above the coin cups using some cotton buds and alcohol.
Above each cup 2 sensors are located - one dark and one light coloured sensor.
Advertisement
Table of Contents
Related Manuals for Safescan 1200
Summary of Contents for Safescan 1200
- Page 1 SAFESCAN 1200 CLEANING INSTRUCTIONS Switch off the machine and unplug it from the mains electricity supply. Remove the three screws from the top cover using a cross-head screwdriver. Remove the cover and disconnect the cable that connects the cover to the machine.
- Page 2 Clean the passing sensors with cotton buds and alcohol. One transparent and one dark sensor located above the disk One large transparent sensor located underneath the disk Clean the disc and the black disk guide as these can become very dirty. Remove the disc from the machine.
- Page 3 Re-assemble the machine. Replace the locking washer using pliers as shown below. CONTACT: Support hotline: +31 (0)79 363 11 71 E-mail support: support@safescan.com...
Need help?
Do you have a question about the 1200 and is the answer not in the manual?
Questions and answers