Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Safescan 1250
Summary of Contents for Safescan 1250
- Page 1 MANUAL ENGLISH SAFESCAN 1250 COIN COUNTER & SORTER www.safescan.com...
- Page 2 ENGLISH INTRODUCTION Thank you for purchasing the Safescan 1250 Coin Counter and Sorter, a product of outstanding ease-of-use and quality. The Safescan 1250 quickly counts coins and sorts them each in its dedicated separate cup, which ensures efficient cash handling.
- Page 3 ENGLISH 2. INSTALLING YOUR SAFESCAN 1250 Connect the power cord of the coin counter into the Press the power switch at the rear to power ON the mains outlet (AC 220~240V). counter. FULL 40 €2.00 €1.00 €0.50 €0.20 €0.10 €0.05 €0.02...
- Page 4 07. Set batch quantity per 1 coin - DOWN 03. Show count result report on display 08. Clear count result 04. Select denomination for batch setting 09. Start counting 05. Set batch quantity per 20 or 50 coins €2.00 www.safescan.com...
-
Page 5: Batch Function
The batch function enables you to create equal batches of coins. The counter will stop when the selected batch quantity has been reached. There are 2 options: Default batch amounts. The Safescan 1250 comes standard with default set batch amounts per denomination. Press to toggle through the batch settings of each denomination, starting with the coin with the largest diameter. - Page 6 If the internal sensors of the device become dirty it will lead to miscounting and/or device malfunctioning. For detailed maintenance instructions please visit the Safescan website: www.safescan.com. IMPORTANT: make sure there are no foreign currency coins inserted and that there are no other objects such as paperclips, staples etc.
- Page 7 ENGLISH 8. USE WITH THE OPTIONAL SAFESCAN TP-230 PRINTER The Safescan 1250 can be connected to the optional Safescan TP-230 thermal printer, which will provide you with a detailed FEED breakdown of the count results. Before you can start using the printer, the baudrate setting of the printer needs to be adjusted from 9600 (default setting of printer) to 1200.
- Page 8 The printout will now show Exit Set mode. The settings have been saved. PLEASE NOTE: When the changes are not saved, the printer will go back to default settings after it has been switched off. For detailed operating instructions please refer to the Safescan TP-230 user manual, included with the printer. www.safescan.com...
- Page 9 This product is in compliance with the essential requirements and other relevant provisions of the applicable European directives. The Declaration of Conformity (DoC) is available at www.safescan.com Take the device to a recycling centre if you want to dispose of it. Never throw any electronic device away with the household waste.
- Page 10 SAFESCAN® is a registered trademark of Solid Control Holding B.V. No part of this manual may be reproduced in any form, by print, copy or in any other way without prior written permission of Solid Control Holding B.V. Solid Control Holding B.V.
Need help?
Do you have a question about the 1250 and is the answer not in the manual?
Questions and answers