Acon X SHADE User Manual & Assembly Instructions page 7

Trampoline placement
Before installing the product, make sure that the following conditions are met:
• Above the trampoline there must be a minimum of 24 feet (7,3 m) clear space from ground level.
Provide clearance for wires, tree limbs, and other obstacles.
• The trampoline should be on a level surface at least 6 feet (2 m) away from any structure such as
walls, fences, vehicles, equipment, and other play areas.
• Maintain a clear space on all sides of the trampoline.
• The trampoline should not be installed over a hard surface such as concrete, asphalt or bricks nor
in proximity to other confl icting installations (e.g., paddling pools, swings, slides, and climbing
frames).
• Use the product in a well-lit area.
• Secure the trampoline and enclosure against unauthorized and unsupervised use.
Safety Latch attachment loops
ACON Sunshades are supplied with two types of attachment loops. In addition to the standard loops,
there are loops with Safety Latch feature, designed to break in high winds, reducing the risk of dam-
age to the trampoline and the sunshade. It is highly recommended to use the Safety Latch loops
according to the assembly instructions.
CAUTION! Despite the safety latches, the sunshade is not intended to be left in place for long periods
of time without supervision. Always take it down after use.
ACON X SHADE 7 Version 1.0