Installing Batteries In The Remote Control; Using The Remote Control - Yamaha DVX-S60 Owner's Manual

Installing batteries in the remote control
Insert the batteries in the correct direction by aligning the + and - marks
on the batteries with the polarity markings (+ and -) insidethe battery
compartment.
1. Press the _ part and slide off the battery compartment cover.
2. insert the two batteries (AA, R06, UM-3 type) with + and - oriented
properly.
3. Slide the cover back on so that it snaps into place.
Notes on batteries
• Change all of the batteries if you notice a decrease in the operating
range of the remote control
• Do not use old batteries together with new ones.
• Donotusedifferenttypesofbatteries(suchasalkalineandmanganese
batteries) together. Read the packaging carefully as these different
types of batteries may have the same shape and color.
• If the batteries have leaked, dispose of them immediately. Avoid touching
the leaked material or tetting it come into contact with clothing, etc.
Clean the battery compartment thoroughly before installing new
batteries.
Using the remote control
J
/
Approximately 6 rn (20 feet) /_30 _
Handling the remote control
• Do not spill water or other liquids on the remote control
• Do not drop the remote control.
• Do not leave or store the remote controt in the following types of
conditions:
- high humidity or temperature such as near a heater, stove or bath;
- dusty places; or
- in places subject to extremely low temperatures.
E-5