Advertisement
Ⅰ. TEST NOTE
Please follow the pointed test steps and choose the right test equipment to conduct
1.
adjustment, otherwise good effect of Unit could not be obtained. The unit should be
warmed up for 30 minutes before adjustment and every parameter should be adjusted
repeatedly till the optimum value obtained, the pointed voltage value should be ensured
during test to get satisfied test result.
2.
Test environment
1) Temperature
2) Relative Humidity : 45-75%
3) Air pressure
3 Test equipments（The following equipment should be calibrated before testing）
1) Computer
2) Multi-meter (VICTOR VC9801)
3) Video Signal Generator (Chroma Model 2227/2327)
4) Color Analyzer (Chroma Model 7120 )
5) DDC card (DYNACOLOR, INC D8330)
6) TV Video Signal Generator (FLUKE PM54200)
Item
1. Enter the
adjust menu
2. Loading
default data
3.Color
temperature
adjust
a. Auto adjust Pattern Generator
b.9300K
c.7500K
d.6500K
4.TV setting
AFC setting
PDF 文件使用 "pdfFactory Pro" 试用版本创建
B. ADJUSTMENT MANUAL
： 15°C-35°C
: 86-106KPa
Equipment
TV Video Signal
Generator
TV Video Signal
Generator
1280*1024 75HZ
Color analyzer
Pattern Generator
Full white pattern
Color analyzer
Pattern Generator
Full white pattern
Color analyzer
Pattern Generator
Full white pattern
Color analyzer
60dB , Color bar and Gray
TV Signal Generator
Condition
Power on the TV , push the "call"
Gray
Key of the remote controller 5 times in 3
seconds. The " version xxxx" will
display in the screen. Then push the
"menu" key to enter the factory setting
status.
Gray
"LOAD DEFAULT"
"AUTO COLOR"
Color bar
Adjust R.G.B data in factory status
x:285
Adjust R.G.B data in factory status x:299
y:315
Adjust R.G.B data in factory status x:313
y:329
www.fineprint.com.cn
1 set
1 set
1 set
1 set
1 slice
1 set
Adjust method
2
y:293 Y:160cd/m
2
Y: 160cd/m
2
Y: 160cd/m
Set "AFC" on
Advertisement
