Husqvarna 525iHF3 Operator's Manual page 3

21. Battery
22. Battery release buttons
23. Warning LED
24. Battery indicator button
25. LED indicator for the state of charge
Symbols on the product
WARNING: This product can be
dangerous and cause serious injury or
death to the operator or others. Be careful
and use the product correctly.
Read the operator's manual carefully
and make sure that you understand the
instructions before you use this product.
Use a protective helmet in locations where
objects can fall on you. Use approved
hearing protection. Use approved eye
protection.
Use approved protective gloves.
Use stable boots with non-slip soles.
yyyywwxxxx The rating plate shows serial number.
yyyy is the production year and ww is
the production week.
Note:
Other symbols/decals on the product refer to
special certification requirements for some markets.
2129 - 002 - 24.11.2023
There is no electrical insulation in this product. If the product touches or comes
near high voltage power lines, it can cause serious injury or death to the opera-
tor. Electricity can move between different objects by a curve. The highter the
voltage, the longer the electricity can move. Electricity can also move through
branches and other objects, especially if the object is wet. Always keep a dis-
tance at a minimum of 10 m/33 ft between the product and high voltage power
lines and/or objects that touches the power lines. If it is necessary to do work
near the power lines, make sure that the power is off before you start the work.
Keep a distance at a minimum of 15 m/50 ft to other persons or animals during
the operation.
Rated voltage, V
Direct current.
The product has protection against
splashing water.
If the product features Bluetooth
technology. The Bluetooth
marked on the product name label.
Disconnect battery before maintenance.
Stop the product fully before you touch the
cutting tool.
Stop the product fully before you touch the
cutting tool.
California Proposition 65
Manufacturer
Husqvarna AB
®
wireless
®
symbol will be
3