Table of Contents
Advertisement
Available languages
Available languages
AiR
CONDITIONER
FEATURES
_) MODE
select
button
O
0
AUTO 0
0
COOL
FAN
0
0
11MER ON
TIMER OFF
NOTE:
oTo choose operating
mode, press the MODE
button.
Each time you press the button,
a mode
is selected
in a sequence
that goes from Auto,
Cool, Dry,
Fan The indicator
light beside will be
illuminated
and remained
on once the mode is
selected.
To operate
on Auto
feature:
• In this mode, the fan speed can not be adjusted,
it starts automatically
at a speed according
to
the room temperature.
If the room does not
get too warm, it will stay at Low speed.
To operate
on Fan Only:
• Use this function
only when cooling
is not
desired,
such as for room air circulation.
You can choose any fan speed you prefer.
• During this function,
the display will show the
actual room temperature,
not the set temper-
ature as in the cooling
mode.
Q SLEEP
button
O
O
% % ,O..oo
.,ooo
NOTE:
In this mode, the selected
temperature
will
increase(cooling)
by 1°C/2°F
30 minutes.
The temperature
will then increase(cooling)
by another
1°C/2°F
after an additional
30
minutes.
This new temperature
will
maintain
for
7 hours before
it returns
to the originally
selected
temperature.
The Sleep
mode program
can be cancelled
at any time during
operation
by again
pressing
the SLEEP
button,or
turning
off the unit, or
pressing
the MODE or FAN button.This
feature
is unavailabe
under FAN or DRY mode.
_) LED Display
O
O
% % ,O..oo
.,ooo
NOTE:
Shows the set temperature
in "_C" or "°F"
and the Auto-timer
settings.
Error codes:
El- Room temperature
sensor error-
Unplug the unit and plug it back in. If
error repeats, call for service.
E2- Evaporator
temperature
sensor error-
Unplug the unit and plug it back in. If
error repeats, call for service.
E3= Conenser temperature
sensor error-
Unplug the unit and plug it back in. If
error repeats, call for service.
PI= Bottom tray is full- Remove the bottom
drain plug and drain off the water.
Advertisement
Table of Contents
