Advertisement
EasyCool Portable
MPF
Rated voltage: 115V
Frequency: 60Hz
Warning notices: Before
using this product, please
read this manual carefully
and keep it for future
reference.
The design and
specifications are subject to
change without prior notice
for product improvement.
Consult with your dealer or
manufacturer for details.
version A - 03 - 201
8
USER MANUAL
MPF08CR81-E
MPF10CR81-E
MPF12CR81-E
MPF14CR81-E
www.midea.com
en
Advertisement
Related Manuals for Midea EasyCool MPF08CR81-E
Summary of Contents for Midea EasyCool MPF08CR81-E
- Page 1 The design and specifications are subject to MPF08CR81-E change without prior notice for product improvement. MPF10CR81-E Consult with your dealer or MPF12CR81-E manufacturer for details. MPF14CR81-E www.midea.com version A - 03 - 201...
-
Page 2: Table Of Contents
Owner’s Manual 0 Safety Precautions ................3 Unit Specifications and Features ........... 5 Operating Instructions ..............7 Installation Instructions ..............12 Care and Cleaning ................17 Troubleshooting Tips ............... 18 Remote Control Operating Instructions ........19 Read This Manual Inside you will find many helpful hints on how to use and maintain your air conditioner properly. -
Page 3: Safety Precautions
Safety Precautions To prevent injury to the user or other people and property damage, the following instructions must be followed. Incorrect operation due to ignoring of instructions may cause harm or damage. The seriousness is classified by the following indications. This symbol indicates the possibility of death or serious injury. - Page 4 WARNING • The unit must be kept free from obstruction to ensure proper function. • DO NOT allow children to play with the air conditioner. Children must be supervised around the unit at all times. • If the air conditioner is knocked over during use, turn off the unit and unplug it from the main power supply immediately.
-
Page 5: Unit Specifications And Features
Unit Specifications and Features Preparation Control panel Horizontal louver blade Caster F r o n t Upper air filter (behind the grille) Handle (both sides) Upper air intake Drain outlet Air outlet Lower air filter Lower air intake Power plug socket Drain outlet (only for pump heating mode) Power cord outlet... - Page 6 Design and Compliance Notes Design Notice: In order to ensure the optimal performance of our products, the design specifications of the unit and remote control are subject to change without prior notice. Energy Rating Information: The Energy Rating for this unit is based on an installation using an un-extended exhaust duct without adapters A or B (as shown in the Installation section of this manual).
-
Page 7: Operating Instructions
Operating Instructions Key Pad Features LED Display Swing Sleep Auto Mode Up (+) and Power Control Mode Timer Speed Selector Down (-) Control Button Swing Button (optional) Timer button (Applicable to the models with auto swing Used to initiate the AUTO ON start time feature only) and AUTO OFF stop time program, in Used to initiate the Auto swing feature. - Page 8 LED Display Swing Sleep Auto Mode Up (+) and Power Control Mode Timer Speed Selector Down (-) Control Button LED display Mode button Shows the set temperature in °C or °F Selects the appropriate operating mode. Each time you press the button, a mode and the Auto-timer settings.
- Page 9 Operation Instructions COOL operation TIMER operation • Press the “MODE” button until the “COOL” • When the unit is on, press the Timer button indicator light comes on. will initiate the Auto-off stop program, the TIMER OFF indicator light illuminates. Press •...
- Page 10 Other Features FOLLOW ME/TEMP SENSING Feature (optional) NOTE This feature can be activated from the remote control ONLY. The remote control serves as a remote thermostat allowing for the precise temperature control at its location. To activate the Follow Me/Temp Sensing feature, point the remote control towards the unit and press the Follow Me/Temp Sensing button.
- Page 11 • During heating pump mode, remove the lower drain plug from the back of the unit, install the drain connector (5/8” universal female mender) with 3/4” hose (locally purchased). For the models without drain connector, just attach the drain hose to the hole. Place Remove the open end of the Hose adaptor directly over the the lower...
-
Page 12: Installation Instructions
Installation Instructions Choosing the Right Location Your installation location should meet the following requirements: • Make sure that you install your unit on an even surface to minimize noise and vibration. • The unit must be installed near a grounded plug, and the Collection Tray Drain (found on the back of the unit) must be accessible. - Page 13 Tool Needed • Medium Phillips screwdriver; • Tape measure or ruler; • Knife or scissors; • Saw (optional, to shorten window adaptor for narrow windows). Accessories Your Window Installation Kit fits windows 67.5-123 cm (26.5-48”) and can be shortened for smaller windows. Part Description Quantity...
- Page 14 Window Installation Kit Step One: Preparing the exhaust hose Exhaust hose Exhaust hose assembly assembly Press the exhaust hose into the window slider adaptor and unit adaptor, clamp automatically by elastic buckles of the adaptors. Unit Window slider adaptor adaptor Step Two: Install the exhaust hose Hook assembly to the unit...
- Page 16 Type 2: Sliding window installation Foam seal B (Adhesive Cut the adhesive foam seal A and B strips to the type-shorter) proper lengths, and attach them to the window sash and frame as shown. Foam seal A (Adhesive type) 2. Insert the window slider assembly into the window opening.
-
Page 17: Care And Cleaning
Care and Cleaning Safety Precautions • Always unplug the unit before cleaning or servicing. • DO NOT use flammable liquids or chemicals to clean the unit. • DO NOT wash the unit under running water. Doing so causes electrical danger. •... -
Page 18: Troubleshooting Tips
Troubleshooting Tips Faults Diagnosis Please check the machine according to the following form before asking for maintenance: Problem Possible Cause Troubleshooting P1 Error Code. The water collection tray is full. Turn off the unit, drain the water Unit does not from the water collection tray turn on when and restart the unit. -
Page 19: Remote Control Operating Instructions
Remote Control Operating Instructions Remote Control Specifications Model RG57H2(B)/BG(C)EF Rated voltage 3.0V (Dry batteries R03/LR03x2) Signal receiving range Environment -5°C ~ 60°C (23°F ~ 140°F) Function Buttons Before you begin using your new air conditioner, make sure to familiarize yourself with its remote control. - Page 20 Handing the Remote Control NOT SURE WHAT A FUNCTION DOES? Refer to the How to Use Basic Functions and How to Use Advanced Functions sections of this manual for a detailed description of how to use your air conditioner. SPECIAL NOTE Button designs on your unit may differ slightly from the example shown.
- Page 21 Remote LED Screen Indicators Transmission Indicator Lights up when remote sends signal to unit ON/OFF display MODE display Appears when the unit is turned on and disappears when it is turned off Displays the current mode, including: TIMER ON display TIMER OFF display AUTO COOL...
- Page 22 How to Use Use the Basic Fuctions SETTING TEMPERATURE The operating temperature range for units is 17-30°C (62°F-86°F). You can increase or decrease the set temperature in 1°C (1°F) increments. AUTO operation In AUTO mode, the unit will automatically select the COOL, fav.
- Page 23 FAN operation 1. Press the butt on to select FAN mode. 2. Press butt on to select the fan speed: AUTO, LOW, MED or HIGH. 3. Press the button to start the unit. fav. NOTE mode temperature You can’t set temperature in FAN mode. As a result, your remote control’s LCD screen will not display temperature.
- Page 24 Setting the Timer Functions Your air conditioning unit has two timer-related functions: TIMER ON - sets the amount of time after which the unit will automatically turn on. TIMER OFF - sets the amount of time after which the unit will automatically turn off.
- Page 25 3. Wait 2 seconds, then the TIMER OFF function will be activated. The digital display on your remote control will then return to the temperature display. T imer on NOTE When setting the TIMER ON or TIMER OFF functions, Continue to press up to 10 hours, the time will increase in 30 minute fav.
- Page 26 How to Use the Advanced Functions SLEEP Function The sleep function is used to decrease energy use while you sleep (and do not need the same temperature settings to stay comfortable). This function can only be activated via remote control. Note: The sleep function is not available in FAN or DRY mode.
- Page 27 NOTES • When there are wide differences between remote controller Illustration and “USER’S MANUAL” on function description, the description on “USER’S MANUAL” shall prevail. • The device could comply with the local national regulations. In Canada, it should comply with CAN ICES-3(B)/NMB-3(B). In USA, this device complies with part 15 of the FCC Rules.