Advertisement
4
CRIB ASSEMBLY - MATTRESS SUPPORT PANEL ASSEMBLY
4a. Align the Mattress Support Panel (6) to all
the corners of the crib as shown in the
illustration.
4b. Use the Bolt (C) to attach the Mattress
Support Panel to the corners of the crib.
Tighten the Bolts using Allen Key (J)
provided.
4c. Note that the Lowest position of the
Mattress Support Panel will be for
Toddlers (babies who can stand up and
walk), the Mid position is for infants
(babies who start to turn and sit up) and
the Highest Position is for newborn
babies.
4d. Ensure that the Mattress Support Panels
are flat side up and not at a slant.
WARNING:
Fall Hazard: When a child is able to stand,
set the mattress at the lowest position
and remove bumper pads, large toys, and
other items that could serve as steps.
NOTE:
Please use the Bolt (G) to cover the extra
holes for different heights of the mattress
support. To ensure correct assembly, the
warnings on the pouch of the mattress
support panel must face up.
C
Bolt M6 X 17mm (x4)
Boulon M6 X 17mm (x4)
Perno M6 X 17mm (x4)
20
G
Bolt M6 X 17mm (x8)
Boulon M6 X 17mm (x8)
Perno M6 X 17mm (x8)
6
(C)
6
By
Advertisement
