Advertisement
6
CRIB ASSEMBLY - MATTRESS SUPPORT PANEL ASSEMBLY
6a. Align the Mattress Support Panel
(10) to all the corners of the crib as
shown in the illustration.
6b. Use the Bolt (D) to attach the
Mattress Support Panel to the
corners of the crib. Tighten the Bolts
using Allen Key (G) provided.
6c. Note that the Lowest position of the
Mattress Support Panel will be for
Toddlers (babies who can stand up
and walk), the Mid position is for
infants (babies who start to turn and
sit up) and the Highest Position is
for newborn babies.
6d. Ensure that the Mattress Support
Panels are flat side up and not at a
slant.
WARNING:
1. Fall Hazard: When a child is able to
stand, set the mattress at the lowest
position and remove bumper pads,
large toys, and other items that
could serve as steps.
Note:
Please use the Bolt (H) to cover the
extra holes for different height of the
mattress support.
D
Bolt 5/8" (×4)
Boulon 5/8" (×4)
Perno 5/8" (×4)
22
F
Wooden Dowel (×1)
Cheville en bois (×1)
Clavija de madera (×1)
H
Bolt 5/8" (×8)
Boulon 5/8" (×8)
Perno 5/8" (×8)
10
(F)
(D)
10
By
Advertisement
