Table of Contents
Advertisement
Locate the air conditioner firmly by wrenching
the nuts after having adjusted the body's
position well.
12.2.2.5 Install the panel
Remove the grille
Hang the panel to the hooks on the mainbody.
Tighten the screws under the panel hooks till
the panel closely stick on the ceiling to avoid
condensate water.
Hang the air-in grill to the panel, then connect
the lead terminator of the swing motor and that
of
the
control
terminators on the body respectively.
Note: The panel shall be installed after the
wiring connected.
12.3 Outdoor unit installation
12.3.1 Service space for outdoor unit
39
box
with
corresponding
Advertisement
Table of Contents
