Daitsu CDV-46 Manual page 42

Wired Controller CDV-46
6.5.1 General Timer
Unit On/Off after a desired hour can be set through general timer.
Set Timer: when timer is not set, press TIMER button to enter timer setting
and "HOUR" icon is blinking. Press "
TIMER button to save the setting and then exit setting.
Cancel Timer: when timer is set, press TIMER button to cancel it.
Timer setting range: 0.5~24h. Pressing "
decreases timer time by 0.5h; holding "
timer time by 0.5h every 0.3s.
In unit On status, timer Off setting is as shown in fig. 6.5 or 6.6.
" button to adjust timer time. Press
" or "
" or "
" or " " button increases or decreases
36
" button increases or