Daitsu CDV-46 Manual page 39

Note:
the available modes are different for different models, the wired controller will
①
automatically select mode setting range according to the model of indoor
unit.
The Auto mode can be only set at the master indoor unit.
②
Under Auto mode, if the indoor unit is running under Cooling, the icons"
③
" will light up; if the indoor unit is running under Heating, the
and "
icons" " and "
6.3 TEMPERATURE SETTING
Pressing "
temperature by 1°C or 1° F ; holding "
temperature by 1°C or 1° F every 0.3s.
In Cooling, Fan, Heating, Floor Heating, 3D Heating or Space Heating mode,
temperature setting range is 16°C~30°C or 61° F ~86° F .
In Dry mode, the temperature setting range is 12°C or 54° F , 16°C~30°C or
61° F ~86° F . In Dry mode, when temperature is 16°C or 61° F , continuously press
" button twice to decrease temperature to 12°C or 54° F (when save function is
"
activated, the temperature in Dry mode can't be adjusted to 12°C or 54°F and the
setting range is "lowest temperature in Save mode" ~ 30°C or 86° F ).
Note:
Under Auto mode or Absence function is activated, the setting temperature
①
" will light up.
" or " " button in On status increases or decreases set
" button increases or decreases set
" or "
33
Wired Controller CDV-46
"