Milwaukee M18 FUEL FN15GA Operator's Manual

Milwaukee M18 FUEL FN15GA Operator's Manual

15 gauge angled finishing nailer

Advertisement

OPERATOR'S MANUAL
Cat. No.
M18 FN15GA
M18 FUEL™ 15 GAUGE ANGLED FINISHING NAILER
WARNING
To reduce the risk of injury, user must read and understand operator's manual.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M18 FUEL FN15GA and is the answer not in the manual?

Questions and answers

Summary of Contents for Milwaukee M18 FUEL FN15GA

  • Page 1 OPERATOR'S MANUAL Cat. No. M18 FN15GA M18 FUEL™ 15 GAUGE ANGLED FINISHING NAILER WARNING To reduce the risk of injury, user must read and understand operator's manual.
  • Page 2 GENERAL POWER TOOL • Do not overreach. Keep proper footing and balance at all times. This enables better control SAFETY WARNINGS of the power tool in unexpected situations. Read all safety warnings, instruc- WARNING Dress properly. Do not wear loose clothing or •...
  • Page 3 Maintain labels and nameplates. These carry • • Never service damaged battery packs. Service important information. If unreadable or missing, of battery packs should only be performed by the contact a MILWAUKEE ® service facility for a manufacturer or authorised service providers. replacement.
  • Page 4 SYMBOLOGY ASSEMBLY Recharge only with the charger WARNING Volts Direct Current manual supplied with your charger and battery. Removing/Inserting the Battery Single Sequential Actuation To remove the battery, push in the release buttons and pull the battery pack away from the tool. Always lock the trigger or remove WARNING Contact (Bump) Actuation...
  • Page 5 Do not use the tool unless you thoroughly under- Single Sequential Actuation Operation stand the actuation mode selected. Remove battery pack and fasteners before leaving 2. Push the tool against the work surface, compressing the work area, moving the tool to another location, the workpiece contact.
  • Page 6 Complete the following checklist IN yourself others when ORDER. If the tool does not work as it should, installing or removing fasteners. Failure to do so contact MILWAUKEE service facility ® could result in injury. Failure to do so could result in immediately. injury.
  • Page 7 Return the tool, battery pack, and charger to a MILWAUKEE service facility for ® repair. After six months to one year, depending on...
  • Page 8 Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...

Table of Contents