Summary of Contents for Milwaukee M18 FUEL 2745-20
Page 1
OPERATOR'S MANUAL MANUEL de L'UTILISATEUR MANUAL del OPERADOR Cat. No. / No de cat. 2744-20, 2745-20 M18 FUEL™ FRAMING NAILERS CLOUEUSE DE CHARPENTERIE M18 FUEL™ CLAVADORA DE ENTRAMADO M18 FUEL™ WARNING To reduce the risk of injury, user must read and understand operator's manual. AVERTISSEMENT Afin de réduire le risque de blessures, l'utilisateur doit lire et bien comprendre le manuel.
GENERAL POWER TOOL • Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from SAFETY WARNINGS moving parts. Loose clothes, jewelry or long hair can Read all safety warnings, instruc- WARNING be caught in moving parts. tions, illustrations and specifica- •...
• Follow all charging instructions and do not charge your capability; contact Milwaukee Tool or a trained the battery pack or tool outside the temperature professional for additional information or training.
FUNCTIONAL DESCRIPTION Installing/Removing Fastener Strips Always remove battery pack before WARNING changing or removing fasteners. Always wear safety goggles or glasses with side shields. Keep fingers clear of fastener track of magazine. Cat. No. Pusher could pinch fingers, causing injury. 2744-20 To install fastener strips: 1.
Page 5
the work. Keep face and body away from the tool. 4. Remove your finger from the trigger and remove the During normal use, the tool will recoil immediately tool from the workpiece. after driving a fastener. This is a normal function Reload Indicator of the tool.
Return the tool, battery pack, and charger To reduce the risk of injury to your- WARNING to a MILWAUKEE service facility for repair. After six self and others, test the tool before months to one year, depending on use, return the...
Take the product to the ASC, along with the warranty card sealed/ is determined by MILWAUKEE to be defective in material or workman- stamped by the distributor or store where you purchased the product,...