Related Manuals for Milwaukee M12 FUEL FCN18GS
Summary of Contents for Milwaukee M12 FUEL FCN18GS
- Page 1 OPERATOR'S MANUAL Cat. No. M12 FCN18GS M12 FUEL™ 18 GAUGE COMPACT BRAD NAILER WARNING To reduce the risk of injury, user must read and understand operator's manual.
-
Page 2: General Power Tool Safety Warnings
GENERAL POWER TOOL • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left SAFETY WARNINGS attached to a rotating part of the power tool may Read all safety warnings, instruc- WARNING result in personal injury. -
Page 3: Nailer Safety Warnings
Maintain labels and nameplates. These carry • of battery packs should only be performed by the important information. If unreadable or missing, manufacturer or authorised service providers. contact a MILWAUKEE service facility for a ® NAILER SAFETY WARNINGS replacement. Some dust created by power sanding, •... -
Page 4: Functional Description
Do not dispose of electric tools FUNCTIONAL DESCRIPTION together with household waste material. Electric tools and electronic equipment that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. SPECIFICATIONS Cat. No.......... M12 FCN18GS Volts............ -
Page 5: Operation
Power/Actuation Selection OPERATION Install battery pack. Always use personal protective WARNING Press and hold the Power button to turn on equipment. Always wear eye protection marked to comply with AS/NZS the tool (the Power button's green LED ring will 1337.1. Eye protection does not fit all operators light). - Page 6 Temperature Protection Mode Clearing a Jammed Fastener When the tool is turned on at extreme Cold/Hot Most jams are caused by a fastener or part of a temperature ranges the tool will enter temperature fastener wedging between the driver blade and the protection mode to avoid damage to the tool.
-
Page 7: Maintenance
Return the tool, battery pack, and Check all screws, bolts, nuts, and pins on the charger to a MILWAUKEE service facility for ® tool. Any loose fasteners must be tightened. - Page 8 Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...
Need help?
Do you have a question about the M12 FUEL FCN18GS and is the answer not in the manual?
Questions and answers