Panasonic NI-L45NR Operating Instructions Manual page 6

4. Close the water fill cover.
5. Re-install the water tank to the main unit.
Press until a click sound is heard.
Push the tan
until it clicks
back in place
HOW TO SUPPLY ELECTRICITY
The iron must be set securely on the power base in order to supply electricity.
Electricity will only be provided while the iron is placed on the power base.
Should you desire to place the iron while moving the garment on your ironing
board, the iron must be placed nowhere else than the power base.
The power base will keep the temperature of the iron at selected level.
HOW TO CONTROL TEMPERATURE
=> How to operate the temperature control pad
1. Every time you push the temperature control pad, the temperature
indicator light moves to the next position, a higher temperature.
2. Desired temperature can be chosen by pushing the pad until the light
comes to its certain position.
TEMPERATURE INDICATOR LIGHTS ( RED):
* Continuously blinks until the iron reaches its
selected temperature.
* Turns on continuously when the iron has reached
its selected temperature to let you know that you
can start ironing
"OFF" LIGHT ( GREEN):
This light turns on when;
* The cord is plugged into the outlet
* The iron has automatically shut itself off.
* The iron has been manually turned off
NOTE: All the light will turn off, once the iron leaves the power base. They will turn on again
when the iron is re-placed.