Ironing Chart - Panasonic NI-L45NR Operating Instructions Manual

FABRIC IRONING CHART
NOTES: 1. Check garment for specific ironing instructions, Always follow manufacturer's
instructions.
2. Iron blended fabrics at setting for lower-temperature fiber or for the
highest percentage fiber.
3. Use caution, some synthetics may melt at high temperature.
* ACRILAN Dry iron on reverse side, or use a press cloth on
* CRESLAN .top of fabric. Don't sprinkle water directly on
1 * ORLON fabric to avoid spots.
ACETATE To iron suede, cover ironing board with brown
METALLICS paper.and use it as a press cloth.
SUEDE
NYLON
* ANTORON Dry iron on reverse side.
* CAPROLAN
SILK
PERM. PRESS
RAYONS
POLYESTER
x DACRON
* FORTREL
* KODEL
TRIACETATE
* ARNEL
W'n W COTTON
WOOL
VELVET
* Trademarks of Fiber Manufacturers.
Dry iron on reverse side. To touch-up collars,
cuffs, pockets, etc..., lightly iron the surface.
Steam ironing is suggested. Never iron completely . but
leave it with little moisture. To iron velvet, use steam but
do not let the iron touch the fabric. Hold it slightly above
the surface.
Steam ironing is suggested. Sprinkle water on the fabric,
depending on its thickness. tron dark fabrics on reverse
side to avoid unwanted sheen.
Steam ironing is suggested. Iron dark fabrics on reverse
side to avoid unwanted sheen.
Panasonic Consumer Electronics Panasonic Sales Company,
Company, Division of Matsushita Division of Matsushita Electric of
Electric Corporation of America Puerto Rico, Ink.{"PSC*)
One Panasonic Way Secaucus Ave. 65 de Infanteria. Km, 9.5
New Jersey 07094 San gabriel Industrial Pack, Carolina.
Puerto Rico 00985
consumerproducts @ panasonic.com i82000-0K64A
-10-