Yamaha TTR 125 2023 Manual page 35

Instrument and control functions
3. Tighten the locknut to the speci-
fied torque. NOTICE: Always
tighten the locknut against the
adjusting nut, and then tighten
the locknut to the specified
torque.
[ECA11242]
4 Tightening torque:
Locknut:
42 N·m (4.2 kgf·m, 31 lb·ft)
Rebound damping force
Turn the adjusting dial in direction (a) to
increase the rebound damping force.
Turn the adjusting dial in direction (b) to
decrease the rebound damping force.
To set the rebound damping force, turn
the adjusting dial in direction (a) until it
stops, and then count the clicks in di-
rection (b).
1. Rebound damping force adjusting dial
Rebound damping setting:
Minimum (soft):
20 click(s) in direction (b)
Standard:
12 click(s) in direction (b)
Maximum (hard):
0 click(s) in direction (b)
TIP
 When turning the damping force
adjusting dial in direction (a), the 0
click position and the 1 click posi-
tion may be the same.
 When turning the damping force
adjusting dial in direction (b), it
may click beyond the stated spec-
4-10
ifications, however such adjust-
ments are ineffective and may
damage the suspension.
Compression damping force
Turn the adjusting screw in direction (a)
to increase the compression damping
force.
Turn the adjusting screw in direction (b)
to decrease the compression damping
force.
To set the compression damping
force, turn the adjusting screw in direc-
tion (a) until it stops, and then count the
clicks in direction (b).
1. Compression damping force adjusting
screw