Advertisement
READ
THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with
the various pad functions of the oven as described below,
CLOCK
PADJ
Used
to set the time of day.
TIMERON/OFF
PADJ
Used to set or
cancel the minute
timer. The minute timer
does not start or stop
cooking. Also,
TIMER ON/OFF pad is
used to set the
Continuous
Bake
feature.
/
START TIME PADJ
Used
to set the desired start time
for baking & Self-Clean.
May be used with BAKE
TIME to program a delayed
bake cycle.
BAKE TIME
UP and DOWN ARROW PADS--
Used along
FEATURE INDICATOR
LIGHTSJ
PAD--
Used to
with the function
pads to select oven
These light to show which feature
enter the length of
temperature,
cook time, start time (when
is in use.
the baking time.
programming
an automatic start time), time
BAKE PADJUSed
.
of day, clean time and minute timer.
/
//
to select the bake
__
e'_
'
::_ _
function.
BROIL PADJ
Used to
....
.......................
.//select
the variable
broil
@
_
:::: _ :i
function.
®
O
•
Oven
Q
OVEN, PREHEAT & DOOR LOCKED LIGHTS* J The "OVEN" light
will glow each time the oven turns on to maintain the set oven
temperature.
The "PREHEAT"
light will glow when the oven is first
set to operate, or if the desired temperature
is reset higher than the
actual oven temperature.
The "DOOR LOCKED"
light will flash
when the oven door locks and unlocks or when using the Self-
Clean cycle or the oven door lockout is activated.
SELF-CLEAN
PADJ
Used to select the Self-
Cleaning
cycle. A 2 or 3
hour Self-Clean time may
be selected.
CLEAR/OFF
PADJ
Used to clear
any function
previously
entered
except the time of day and minute
timer. Press CLEAR/OFF
to stop
cooking. Also the CLEAR/OFF
pad
is used to activate oven door lockout
setting.
*Note: The OVEN indicat0r light on the electronic display will turn ON and OFF when using the Bake feature and dudng
preheat: This is normal and indicates that the oven is cYc!ing t0 maintain the se!ected baking temperature: when th e
preheat indicator light turns OFF, your oven is ready:
For a silent
control
panel
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed for
silent operation. Press and hold _.
After 7 seconds, the control will beep once. This will block the controls from sounding
when a pad is pressed. To return the sound, press and hold _")
again for 7 seconds until the control beeps once.
Temperature
conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature
to °C (Celsius)
or from °C to °F (control
should
not be in a Bake or Clean mode):
1.
Press _.
"
"appears
in the display.
2.
Press and hold the ,/_ until "HI" appears in the display.
3.
Press and hold _
until °F or °C appears in the display.
4.
Press the A
or V
to change °F to °C or °C to °F.
5.
Press any control pad to return to normal operating mode.
Advertisement
