Dale Tiffany TA10606 Assembly Instructions

Available languages

ASSEMBLY INSTRUCTIONS:

Item No: TA10606

1. Place the base on a level surface.

2. Insert the harp (B) until it sits firmly into the saddle (A).

3. Adjust the knurl nut (C) on harp (B).

This can be used to raise the shade a little if necessary.

4. Place the shade (D) over the end of the harp (B) and

tighten the finial (E) securing the shade in place.

5. Insert the bulb into the bulb socket.

Recommended (1) maximum 60 WATT Type "A" Bulb

Or (1) maximum 13WATT CFL Bulb

(Bulb not included)

Cleaning of your lamp.

Unplug lamp, wipe with a damp cloth.

Do not use abrasives

*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Made in China

FOR RETURN SHIPPING PURPOSES:

PLEASE RETAIN ORIGINAL PACKAGING

TO MINIMIZE DAMAGE.

Revision –04/20/12

Table of Contents

Do you have a question about the TA10606 and is the answer not in the manual?

Page 1 ASSEMBLY INSTRUCTIONS: PLEASE RETAIN ORIGINAL PACKAGING TO MINIMIZE DAMAGE. Item No: TA10606 1. Place the base on a level surface. 2. Insert the harp (B) until it sits firmly into the saddle (A). 3. Adjust the knurl nut (C) on harp (B).
Page 2 INSTRUCIONES DE ASAMBLEA: PARA RAZONES DE REGRASAR: POR FAVOR CONSERVE EL IMPAQUETADO ORIGINAL Modelo: TA10606 PARA REDUCIR DAÑOS MINIMO. 1. Ponga la base en una superficie llana. 2. Inserte la arpa (B) hasta que se siente firmemente en la silla de montar (A).