Using Your Rapid Cold Brew Maker - Dash DCBCM400 Instruction Manual

USING YOUR Cold Brew Maker
B
Place the Reusable Filter inside the Hopper. Close the Hopper by attaching
2
the Hopper Lid and turning clockwise—there will be a click when it is
properly closed and locked. Place the Hopper on top of the base of the
Cold Brew Maker, aligning the bottom of the Hopper with the indent on top
of base (photo B).
attached to the base (listen for a click).
Fill the Carafe with your desired amount of cold water and close it with the
3
Carafe Lid (photo
You may have to push down for the Hopper to be firmly
C).
C
∙ 9 ∙