Advertisement
STEP 10
Assemble The Nesting Box
10.1 Cut 5/8" plywood for the box according to the drawing.
You will need to cut one 10" x 6'-8 3/4" sheet for the top plane, one 1'-8" x 6'-8 3/4" sheet for the bottom
plane, one 2'-6" x 6'-8 3/4" sheet for the back wall and six 1'-8" x 2'-4 3/4" sheets for the side and inner
partitions.
10.2 Use 1 1/2" x 3 1/2" pressure-treated material for building the nesting box frame and secure with 3"
and 5" wood screws. You will need two boards cut to 3'-1 1/2", two boards cut to 2'-3 1/2", two boards
cut to 1'-1" and two boards cut to 6'-8 3/4".
10.3 Provide and install nest's roost from the pressure-treated lumber with cross section 3/4" x 1 1/2".
You will need ten boards to 2'-2" and two boards cut to 6'-7 1/2".
Advertisement
