Advertisement
STEP 1
Framing The Floor
1.1 Assemble the frame using 1 1/2" x 5 1/2" pressure-treated material. You will need two
boards cut to 6' that will be the rim joist and two boards cut to 4'9" that will be the joist.
1.2 Provide 4 joists from the pressure-treated lumber with cross-section 1 1/2 x 5 1/2 inch
and install them into the frame according to the drawing.
1.3 Secure the beams with 3x5" screws.
1.4 Using a speed square or carpenter's square, check the corners to make sure the
corners are 90 degrees.
Advertisement
