Panasonic KX-FP200 Operating Instructions Manual page 9

ra Fan the stack of paper to avoid a paper jam and
insert the paper into the paper tray.
Upper limit
eThe height of the stack of the paper should not
exceed the upper limit on the paper tray, or it
may cause a paper jam. @)
oThe paper should not be over the tab. =
olf the paper is not inserted correctly, readjust the QO
paper or a paper jam may occur. sc
stack of os ~*
paper a
Paper tray =
Correct Incorrect
Move the recording paper set lever back.
Recording paper
olf the lever releases, the unit will beep and the set lever
following message is displayed. =
Move the lever back again. a
S
=
6 Pull out the paper stacker from the bottom of the
unit completely.
©Do not place the unit in areas where the paper
tray may be obstructed by walls, etc.
Note:
©Do not use different types or thicknesses of paper in the paper tray at the same time. This may cause a
paper jam.
oAvoid extremely smooth or shiny paper that is highly textured. Also avoid paper that is coated, damaged or
wrinkled paper with a cotton and/or fiber content that is over 20 %.
Avoid used paper for double-sided printing.
eDo not use paper printed from this unit for double-sided printing with other copiers or printers, or a paper jam
may occur.
Adding paper to the paper tray
Recording paper
1. Pull the recording paper set lever forwards. set lever
oThe unit will beep and the following message is
displayed.
Remove the installed paper.
Add paper to the removed paper.
Fan the stack of paper and insert it into the paper
tray.
5. Move the recording paper set lever back.
For Assistance, Call 1-800-435-7329 9
POR