Panasonic KX-FP200 Operating Instructions Manual page 68

Replacing the film or film cartridge (cont.)
D
68
Insert the blue gear into the blue core of the
new film.
Insert the three green gears into the remaining
cores of the new film.
Insert the film into the cartridge so that the blue
gear matches the blue label on the cartridge.
Lock the four gears of the film by (@) pushing
back the top side gears and (®) pulling the
bottom side gears forward until they lock into
place.
olf the film is slack, tighten it by winding the
bottom side gears.
Incorrect Correct
QQ O70
Insert the film cartridge by matching the blue
label on the cartridge with that on the unit.
Close the front cover securely by pushing down
on both ends.
oThe unit will check the film is set correctly and
the following message will be displayed.
Display: | PLEASE WAIT
olf the following message is displayed, the film
is not correctly inserted in the cartridge.
CHECK FILM
Reinsert it correctly.
Guide tabs
Guide tabs
Top side
gears
Bottom
side gears
Biue core
Bottom
side gear
Top side gear