Panasonic KX-FP200 Operating Instructions Manual page 57

Setting the transmission report printing
One of the following choices is available.
ERROR: The transmission report will print out only when fax transmission fails.
ON: The report will always print out, indicating whether fax transmission is successful or not.
OFF: The report will not print (pre-selected setting),
| Press (MENU). Dial keypad
Display: | SYSTEM SET UP
? Press (#], then (0) (4).
TX-REPORT MODE
Press |{START/COPY/SET | .
MODE=OFF [VA]
Press (Y) or () to select the desired setting.
START/COPY/SET
Press |[START/COPY/SET).
Press (MENU).
or ol BS &
Setting the journal report to automatically print
This unit will automatically print a journal report after every 35 fax communications. After printing, the journal
report will still remain in memory and the oldest communication will be erased when a new communication
occurs.
When this feature is deactivated, the unit will store the records of the last 35 fax communications, but the unit
will not print the journal report automatically.
1 Press (MENU). Dial keypad
? Press [#], then [2] [2].
Press |START/COPY/SET).
MODE=ON [VA]
Press (¥) or @) to select the desired setting.
Press (START/COPY/SET). START/COPY/SET
Press (MENU).
org sb @&w
57
te12