A-Board Replacement - Panasonic TH-47LFX6U Service Manual

TH-47LFX6U/TH-47LFX6W
7.9.

A-Board Replacement

Attentions when replacing the A-Board
• When you replace the A-Board, please execute "WS Adj." in
IIC mode.
(Refer to "5.2.1. Procedure for performing WS Adj.")
1. Remove the Rear Plate.
(Refer to "7.5. Rear Plate Removal")
2. Disconnect the connectors and remove the screws.
3. Remve the screws joining the A-PCB Metal and A-Board,
and then remove the A-PCB Metal from the A-Board.
Attention when attaching the A-Board
• When attaching the A-Board, the gasket (TEWB645)
attached to the AV Cover Bottom Assy is pressing down the
metal fitting of A-Board certainly.
Attention when replacing the A-Board
• Stick the aluminum tapes (2 places) on the A-Board for
repair.
28