Tapes - RCA VR348 User Manual

Connecting Two VCRs for Copying Tapes
D
Option A hookup.
Use this hookup for a simple conneation which
requires fewer accessories.
1. Select a hookup
from pages 2 through 5
a_.d then modify with this connection.
Set the CH3 CH4 switch on the playback
VCR to either channel 3 o1" 4.
You wil! tune the recording VqTRto this channel
to receive the signal from the playback VCR.
2.
3. Connect as shown.
This connection may require additional
accessories not provided.
4. Plug in power cords of VCRs and TV.
Playback VCR
From Antenna, Cable ..........................................................
or Cable Box ..... _................................. ",,
RF Coaxial Cable
(supplied)
Recording VCR
ii_ il llllilitlllll tl
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.
Option B hookup.
Use this hookup for. slightly improved copy
quality and more convenient operation -- use of
TV,VGR button not required.
1. Select a hookup from pages 2 through 5
and then modify with this connection.
2.
Connect as shown.
This connection requires additional accessories
not provided.
If your other VCR is stereo, you may need a
Y-adapter to hear sound from both left and
right channels.
3. Plug in power cords of ¥CRs and TV.
4.
_illl, I i I1_ ' It (tl li_l_llll
You will select the line (audio/video)
input on the recording VCR to receive the
signal from the playback VCR.
Caution: The unauthorized recording
of satellite broadcasts, television
programs, or other rnateriah; may
infringe the rights of others.
Playback VCR (only)
(_ RF OUT
Recording VCR
From Antenna, Cable
or Cable Box
AudioNideo, --
or -- RF c_l _,
ca_les I II (s_,ed)
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.