Table of Contents
Advertisement
trouble
Checks
Trouble
Here's
what
to try:
;treaks
in picture
during normal p]Layback
• Some snow/streaks
are normal during search or stop-action
playback.
Nill not record
• VCR is in pause mode.
Press PAUSE.
• Safety tab removed
from cassette.
• Make sure the line indicator
(VID1) is turned
off irt VCR's display panel for
normal
recording from the VCR's tuner.
Press INPUT to turn off the line
indicator.
_ewind
does not operate
• Tape already rewound.
VCR Plus+ or timer recording not made
• Wrong PlusCode number
entered.
)r wrong program
recorded
• Cable box was not turned on or was tuned to the wrong channel at time
recording
was to begin.
• Program
entered incorrectly
(wrong charmel or times).
• Power interruption.
Clock area in display panel will show - -:- -.
• Check to see if time and date are correct --- including
AM/PM.
• Check Signal Type: CABLE/ANTENNA feature.
See page 8.
• Prog-ram exceeded tape's length or tape was not rewotmd
beforehand.
• VCR was not turned
off at the time recording
was. to start.
• No tape in VCR or cassette's
safety tab broken
off.
C.lock shows
incorrect
time or date
_ • Power interruption.
Clock on the front panel will show --:--.
i
• Clock was not set accurately
(check AM/PM and date).
•Tirne
counter display
appears
in VCR's display panel
Press DISPLAY on
remote.
VCR makes
noise when
stopped
• VCR is removing
tape from heads.
This is normal.
'The head cylinder inside
the VCR will continue
to rotate for a few minutes
after you put the VCP in
the stop mode.
......................................................................................................................................................
i..............................................................................................................................................................................................................................
Will not auto channel
search actiw.'
_ • Check antenna connections.
:hannels
correctly
• Check Signal Type: CABLE/ANTENNA feature.
See i_age8.
Cannot select channels
over 69
:: • Cable channels over 69 can only be selected if Signal Type:
:
CABLE/ANTENNA feature is set to CABLE. Detaii!s ;re on page 8.
2_assette with safety tab removed
does not start to
• Set Auto Play ON/OFF feature to ON. Details are on page;12.
91ay automatically
9isplays
appear
in wrong language
• Language
feature set incorrectly.
Details are on page 9.
31
Advertisement
Table of Contents
