Connecting To Video Components - ViewSonic VPW4200 User Manual

INSTALLATION INSTRUCTIONS (continued)

Connecting to Video Components

(1) Make sure that the power switch of the display is turned off.
(2) Make sure that the power switch of the Video component is turned off.
Applicable video signals for each input terminal
(See page 33~36 for details)
Terminal
Type Composite
AV1 O
AV2 O
AV3
AV4
RGB1
RGB2
RCA DVI
S-video Component PC/STB
O
O
O
O
O
Display rear panel
r b
Pr/Cr Pb/Cb
[An example of connecting video components]
• If the OUTPUT (MONITOR) terminal is connected to a 2nd monitor,
it is possible to view the same image as on the main source. The
composite video signal from AV1, AV2 input will be displayed on
both screens at the same time.
D-sub Remarks
RGB
Refer to P18
Refer to P18
480i Video Signal only
1080i/720P/480P/480i inputs.
Refer to P18
Refer to P18
O
Refer to P18
(O: Available)
ViewSonic VPW4200/4210
14