Table of Contents
Advertisement
TOOLS REQUIRED
Cordless Drill
1/8" Drill Bit
IMPORTANT INFORMATION
•
One Technician is recommended for this installation.
•
Read all of the instructions thoroughly before performing this installation.
•
There must be a minimum of 30" clearance between the wall and the retracting side of the spa
for cover to operate properly and 4" on each side for Side Arm clearance.
•
The Warning Label on the cover is always the front of the cover; the lifter will attach on either the
back side of the spa or the left side of spa depending on cover confi guration.
•
The cover side with the Warning Label will always fold over to the side without the Warning Label.
•
To ensure that the cover seals correctly, the spa must be level.
•
Use screws in bag #3 on spas with removable panels.
INSTALLATION REQUIREMENTS
Flat Head Screwdriver
Fine Tip Marker
7/16" Socket with
Ratchet
1/2" Wrench
#2 Square Drive Bit
Safety Glasses
2
Advertisement
Table of Contents
