Step-By-Step Installation - Samsung WW1 CB Series User Manual

Step-by-step installation

STEP 1 Select a location
Location requirements:
• Solid, level surface without carpeting or flooring that may obstruct ventilation
• Away from direct sunlight
• Adequate room for ventilation and wiring
• The ambient temperature is always higher than the freezing point (0 °C)
• Away from a heat source
NOTE
• To prevent excessive vibration while operating the washing machine, consider stability before anything
else.
• Install your washing machine on a solid and level floor.
• Do not install your washing machine on soft floors or floor coverings.
• If you install your washing machine on a wood floor, install a water-resistance wooden panel
(min 1.18 in. / 30 mm thick) to the floor. Also, we recommend installing your washing machine on the
corner of the wood floor.
Untitled-1 17
NOTE
While unpacking the washing machine, lift the washing
machine from the foam base. Make sure the drum
support was removed from the bottom of the washing
machine.
English 17
2023-09-26 11:02:41