Charging The Battery - dji Osmo Pocket 3 User Manual

Refer to the DJI Mimo App section for more information on how to use the app.
• If DJI Mimo prompts to update the firmware after activation, tap the notification to
update the firmware to the latest version for a better shooting experience. Ensure the
battery level is above 15% before updating the firmware.

Charging the Battery

Use the Type-C to Type-C PD cable (included) to connect a USB-C charger (not included) to the
USB-C port at the bottom of Osmo Pocket 3. It is recommended to use the DJI 65W Portable
Charger, DJI 30W USB-C Charger, or other USB-C Power Delivery chargers. When charging in the
power-off state, the power status can be checked on the touchscreen. It takes about 16 minutes
to charge the battery to 80% and 32 minutes until fully charged.*
* Tested in a laboratory environment with the DJI 65W PD charger (sold separately).
When the handle or battery handle is mounted, use the USB-C port on the rear of the handle for
charging.
• If the battery handle is mounted, the battery handle will not start charging until the
battery of the handheld gimbal camera is fully charged.
ON
DJI Osmo Pocket 3 User Manual
DJI MIMO
Device
Device
TEMPLATE
OSMO MOBILE 4
00 !39
Life Advice Looking Through...
Home Album
OSMO ACTION
©
2023 DJI All Rights Reserved.
ACADEMY
SUPPORT
COMMUNITY
MORE
01!23
Do A Sporting Stag
Edit Me
MORE
11