Hyundai IONIQ 6 2023 Quick Reference Manual page 30

Pairing to an iPhone via Apple CarPlay
After you connect an iPhone to the vehicle with Apple CarPlay, you can run and control Apps
on the phone through the system screen.
1
To use Apple CarPlay, first check the following:
 For iPhone models that support Apple CarPlay, visit the Apple website at https://www.
apple.com/ios/carplay.
 Make sure Apple CarPlay and Siri are enabled in your iPhone settings. If you do not
see options for Apple CarPlay or Siri, update to the latest iOS version.
2
On the All Menus screen, press Setup > Device Connections > Phone
Projection Settings > Apple CarPlay and select the Enable Apple
CarPlay checkbox.
A Select Use Split Screen on Apple CarPlay Screen to show split screen when using
Apple CarPlay.
3
Connect an iPhone to the USB port on the vehicle by using the provided
USB cable.
A When the connection is made for the first time, the system screen displays a
notification window. Check the details and then press OK.
A To end the Apple CarPlay and disconnect from the iPhone, remove the USB cable
from the system.
Ü Ü
Caution
Do not repeatedly connect and remove the USB connector within a short time. It may
cause device errors or system failures.
4
When the iPhone is locked, unlock it first and then consent to the use of
Apple CarPlay.
When the iPhone is recognized successfully, the Apple CarPlay menu is activated on the
All Menus screen.
28
Useful functions