Table of Contents
Advertisement
A Note the following to ensure accurate recognition of your voice command.
Press the Voice Recognition button. After a beep sound, say your voice command.
Pronounce a command accurately and naturally, without pausing between words, like
you would in a conversation.
The microphone is located above the driver's head. Say your command while
maintaining an upright posture. The microphone location may differ depending on the
vehicle.
A Voice recognition is automatically ended when:
You make or receive a call.
The front or rear cameras operate (if equipped).
A button is pressed to run another function (e.g., radio or media change).
Rerouting or other unexpected action is made due to deviation from the route during
guidance.
A Voice recognition may not work properly when:
The sunroof or windows are open so the wind is strong.
The fan speed of the air conditioner or heater is high.
The vehicle is passing through a tunnel.
The vehicle is driving on an unpaved road and its noise and vibration are loud.
Noise is loud due to a heavy rain or storm.
A When using speech recognition from the rear seats, some commands may not be
supported depending on the vehicle model and type.
A Special characters included in a contact are not recognized by voice (e.g., School_John,
John!).
A Not all languages may be supported depending on the region. Some commands may not
be supported depending on the set language.
A Some functions are available only if you are subscribed to the Bluelink service.
A If the vehicle is type 2, it is possible to change the graphic theme to white or black.
"Graphic Themes (if equipped)."
> See
155
Voice functions
Advertisement
Table of Contents
