Table of Contents
Advertisement
METHOD FOR DISCONNECTING AND CONNECTING CONNECTOR
WITH HOUSING TO ROTATE
METHOD FOR DISCONNECTING AND CONNECTING CONNECTOR WITH
HOUSING TO ROTATE
Method for disconnecting connector with housing to rotate
Turn housing (H1) to the left, and pull it out.
REMARK
Housing (H1) is left on the wiring harness side.
Method for connecting connector with housing to rotate
1.
Insert the connector to the end while aligning its groove to the other.
2.
Turn housing (H1) clockwise until it clicks.
00-66
00 INDEX AND FOREWORD
D155AXI-8
Advertisement
Table of Contents
