Table of Contents
Advertisement
TABLE OF CONTENTS
1. Features
1. Accurate DC/AC digital damp meter for current measurement.
2. 10mA high resolution on 40A DC/AC range.
3. One touch zero for DCA adjustment.
4. 23 mm diameter jaw.
5. Large 3 3/4 digits LCD
6. Fast bargraph display (30 times/sec.) for transient observation.
7. Continuity and frequency measurements.
8. Max/Min and Data Hold functions.
9. 600V overload protection for ohm measurement.
10. Easy single rotary switch for any function selection.
11.ldeal for works i n crowded switch box or cable areas.
2
2
3
6
6
7
8
8
8
8
8
10
12
12
https://tecpel.com E-mail: sales@tecpel.com Tel: 886-2-2218-3111 # 11
2. Panel Description
G)
(I)
©
tactile barrier
1. Transformer Jaw
This is used to pick up current signal. To measure DC/AC current, conductor must
be enclosed by the jaw.
2. TransforrnerTrigger
This is used to open the jaw.
3. Function Selector Sw�ch
This is used to select the function user desired, such as DCA, ACA, DCV, ACV, Hz,
Ohm and Continuity.
4. On/Off Sw�ch
This is used to tum the power on or off.
5. Data Hold Button
Once this button is pushed, reading shall be held on the LCD. Press again to release
it. This button is not available in continuity function.
6. Max/Min Hold Button
This button is used to enable the maximum or minimum value to be displayed and
updated
.during
measurement. Press once, minimum value shall be displayed and
updated. Press again, maximum value shall be displayed and updated. Zero
function will be disabled if MAX/MIN is enabled. This button is not available i n
continuity or Hz function.
3
@
I
I
Advertisement
Table of Contents
