Komatsu WA380-6 Shop Manual page 48

SEN00779-01
Type 2
1. Disconnection
1) Hold the tightening portion and push body
(7) straight until sliding prevention ring (6)
contacts contact surface (a) of the hexag-
onal portion at the male end. (Fig. 6)
2) While holding the condition of Step 1), turn
lever (8) to the right (clockwise). (Fig. 7)
3) While holding the condition of Steps 1)
and 2), pull out whole body (7) to discon-
nect it. (Fig. 8)
2. Connection
Hold the tightening portion and push body
q
(7) straight until sliding prevention ring (6)
contacts contact surface (a) of the hexag-
onal portion at the male end. (Fig. 9)
30
00 Index and foreword
WA380-6 (KA SPEC.)