Product Identification; Machine Serial Number; Machine Identification Plate; Engine Serial Number And Emission Label - Komatsu WB140-2N Operation & Maintenance Manual

INTRODUCTION

PRODUCT IDENTIFICATION

The serial numbers and model numbers on the components are the only
numbers that your dealer will need when requiring assistance or order-
ing replacement parts. It is a good idea to record this information in this
manual on page 0-9 (Serial Number and Dealer Information). All views
indicated below are viewed from the operators position.

MACHINE SERIAL NUMBER

The machine serial number is stamped on the right side of the front part
of the main tractor frame.

MACHINE IDENTIFICATION PLATE

The Komatsu backhoe loaders described in this manual are provided
with the CE mark which certifies that they are in compliance with the
CE standards.
The identification plate is located inside the operators cab on the left
vertical wall of the frame, behind the brake pedals.
ENGINE SERIAL NUMBER AND EMISSION
LABEL
The engine serial number is stamped on a plate located on top of the
engine valve cover.
The emission label is located on the right side of the valve cover.
A60029 to A60048
A20637 to A20813
0-6 WB140-2N, WB150-2N