Table of Contents
Advertisement
the lower line and the current output value
as a DMX value.
4
The 32 light effect units are combined in 2
groups (channel pages) of 16 channels each.
If necessary, use the button PAGE to switch
between the two channel groups 1-16 (LED
A lights) and 17-32 (LED B lights) and repeat
steps 2 and 3, until the desired values are
assigned to all channels.
Adjusting an Illumination Scene with
Movement Patterns and Color effects
The built-in effect generator allows creating 9
different movement patterns for pan and tilt
movement of moving heads or scanners as well
as 7 additional color effects for LED light effect
units. The effects can be saved together with
other DMX values in a scene.
1
Press the button FIXTURE (control LED
lights) and use the number buttons 1-16
to select the devices to be assigned to
an effect.
• If necessary, used the button PAGE to
switch between the two channel groups 1-
6 (LED A lights) and 17-32 (LED B lights).
2
Call the effect mode with the button
MOVEMENT.
• The control LED lights.
3
Select the desired movement patterns or
color effect with the number buttons 1-
16.
• The selected devices will begin to
perform the movement pattern or color
effect.
• Number buttons 1-9: Create movement
patterns designed for pan and tilt
movement of moving heads or scanners.
• Number buttons 10-16: Create color
effects for all kinds of LED light effect units.
• For optimum results of the color effects
triggered by buttons 15 and 16, the
operation with a least 8 devices is
recommended.
4
The parameters of the movement patterns
and color effects can be edited and
adapted to your particular application.
MOVEMENT RANGE
PAN:050%
Fig. 7.2 Adjusting parameters
• Movement patterns 1-9: Press the
button SWAP to switch between the
parameters and adjust the values with
the Pan/Tilt wheels.
- MOVEMENT RANGE: The pan/tilt
movement can be adjusted between 1 and
TL:080%
100 %.
- MOVEMENT OFFSET: Correction values can
be adjusted for fine adjustment of the pan/tilt
movement.
- MOVEMENT SPEED: The running speed can
be adjusted between 1 and 100 %.
- DELAY LEVEL: The delay time for the
operation with several devices can be
adjusted between 0 and 30 seconds.
Advertisement
Table of Contents
