3. OPERATION
3.1. Take all parts carefully and
check them for completeness.
3.2. Remove the protective film
from the solar panel (if any).
3.3. Position the solar panel so that it receives direct sunlight. The fountain can not work if the solar panel is shaded.
Adjust the solar panel angle to maximise the amount of solar energy collected.
3.4. Connect the pump and the LED-Light on the control box (see illustration). Check whether the flow is fully open
(or else promoted little or no water).
4. FROST
Frost can cause damage to the pump. The pump must be removed and stored in a frost proof
environment if the water is likely to freeze.
5. PERFORMANCE
The performance of the pump depends on the orientation of the solar panels toward the sun and the intensity of.
The max. Data obtained under optimal conditions. Function in the shade or on cloudy days can not be guaranteed.
In models with battery operation depends on the function of the battery is charged.
Assembly instruction
of solar pond
pump set
Solar panel
English 3
Pump power cord
Pump plug hole
Pump plug
Summer 0°- 30°
Spring/Autumn 30°- 60°
IMPORTANT!
Twist the connectors
slightly when pushing