Introduction; In General; Operation; Frost - Profi-pumpe LADY IN BLACK-2 Operating Instructions Manual

4. FROST

Frost can cause damage to the pump. In freezing the pump, pipes and water tank must be emp-
tied, rinsed with clean water and stored dry.

5. ASSEMBLY INSTRUCTION

5.1 The set is not pre-connected and you need to
assemble this.
Feed the pump and LED cables through plastic
tube toward the bottom of the fountain body. Cover
the tube hole with the rubber bung provided and
secure it into place to avoid any water leakage.
5.3 Fill reservoir with appropriate amount of water to
completely submerse the pump.
Note: Destilled water is recomended to reduce
mineral deposits and bacteria build-up.
Fountain body
Pump
LED light
Rubber bung
Plastic tube
Fountain body
Fountain reservoir
5.2 Attach pump to the rubber hose. Then place the
fountain ball onto the fountain body.
5.4 Join bracket, tube and spike together, then attach bracket
to back of the solar panel as shown.
Solar panel
Bracket
Tube
Spike
English 3
Fountain ball
Rubber hose
Pump
Fountain body
LED light
Fountain ball
Bracket