Aiwa CDC-MP3 YU Operating Instructions Manual page 16

SOUND ADJUSTMENTS
Source Level Adjuster
DSSA (Drivers Sound Stage
Adjustment)
1 Press SELECT repeatedly to select
DSSA (Drivers Sound Stage
Adjustment) mode.
OFF
For the front left se
1 Press FUNCTION repeatedly to select
the desired mode.
2 Press DISP while pressing SELECT.
The "LEVEL 0" indication appears.
LEVEL 0
2 Rotate the Jog Dial to select the position
of sound stage.
Sound stage changes as follows.
When DSSA is activated, you cannot adjust BAL
(balance), FAD (fader), BASS and TRE (treble)
3 Rotate the Jog Dial to adjust the level.
Rotate clockwise to increase the output level.
Rotate counterclockwise to decrease the
output level.
If you do not operate the Jog Dial within 5
seconds, this function is canceled, and the
indication returns to the current source mode.
Returning to the factory settings
Adjusted settings of VOL, BASS, TRE, BAL,
FAD, H-BASS, DSSA, and source level can be
returned to the factory settings with a simple
operation.
1 With the unit off, press and hold DISP
for more than 2 seconds.
The "LEVEL-" indication appears, and all
sound settings are returned to the factory
LEVEL -
15 ENGLISH