Table of Contents
Advertisement
Using SoundPoint
IP 430 SIP
Placing a Call
Using the Handset:
t. To obtain dial tone, pick up the handset.
2. Dial the desired number.
OR
Dial by SIP URL/IP address!:
•
After obtaining dial tone, press Name
•
Enter URL or IP (press * for
and #
•
Press Send to complete the call.
Using Hands-Free Speakerphone Mode:
1. With the handset on-hook, press any as¬
signed line key, (fijji), or NewCall to obtain
dial tone.
W
2. Dial the desired number.
OR
Dial by SIP URL or IP address! as above.
Using the Headset:
1. With the optional headset connected, press
any assigned line key,
or NewCall to
See also Headset Memory Mode.
obtain dial tone.
W
2. Dial the desired number.
OR
Dial by SIP URL or IP address! as above.
Users also have the option to dial directly from
the dial pad without first getting dial tone. Sim¬
ply enter the number then lift the handset, press
the Dial soft key, or press the Q) or @ keys.
In all cases, the active call will appear on the
display showing call duration and destination.
hands-free modes by pressing tht
© or @ keys, or picking up
fExamples: 10.3.0.42
To obtain the IP address of your phone, press
joe@205.173.1.24
f M-u ~1 followed bv Status. Platform and
sip: jane@polycom. com
Phone. The IP address is listed together with
other phone information.
Advertisement
Table of Contents
