Accessories - Husqvarna 542i XP Operator's Manual

Guide bar and saw chain combinations
The following cutting attachments are approved for
®
Husqvarna 542i XP , 542i XP
Guide bar
Length, in Chain pitch, in
13 0.325
15
12 0.325 mini
14
16
Recommended cutting equipment for
USA
Following is a list of recommended cutting equipment
®
for Husqvarna 542i XP
equipped with either of the listed guide bar and saw
chain combination(s), fulfills the requirements according
to UL 60745-1 and UL 60745-2-13.
Chainsaw models Husqvarna 542i XP
met the kickback performance requirements of UL
60745-2-13 when tested with the combinations of bars
and saw chains listed below. The saw chain Husqvarna
H38 is also classified as a low kickback saw chain
since is met the requirements for low kickback saw
chain outlined in UL 60745-2-13. We recommend to use
only the listed combinations of bars and saw chains for
chainsaw models Husqvarna 542i XP
Other chainsaw models may not meet the kickback
requirements when equipped with the listed bar and saw
chain combinations.
5/32 in / 4.0
SP21G
mm
3/16 in / 4.8
SP33G
mm
36
®
G.
Gauge, mm
1.3
1.1
®
and 542i XP G. This model
®
and 542i XP
®
and 542i XP
60°
80°

Accessories

Saw chain
Max. nose ra- Type
dius
11T Husqvarna
SP33G
8T Husqvarna
SP21G
Guide bar and saw chain combinations
Following is a list of recommended cutting equipment
for Husqvarna 542i XP
combination(s) of powerhead, guide bar and saw chain
meet all requirements outlined in Canadian Standards
Association Z62.1-11 (Chain saws) and Z62.3-11 (Chain
Saw Kickback).
Furthermore the saw chain Husqvarna H38 is evaluated
®
G
and listed as a Type C Low Kickback Saw chain
according to the provisions in Z62.3-11.
Filing equipment and filing angles
Using Husqvarna file gauge will give you the correct
filing angles. We recommend you to always use a
Husqvarna file gauge to restore the sharpness of the
®
G. saw chain. The part numbers are given in the table
below.
If you do not know which saw chain you have on your
product, turn to your servicing dealer.
30° 0°
80° 0°
Length, drive
links (no.)
56
64
51
59
64
® ®
and 542i XP G. The listed
0.025 in/
5950046-02
0.65 mm
0.025 in/
5869334-03
0.65 mm
2022 - 003 - 07.09.2023
Low kickback
Yes
Yes
5950047-02
5962857-01