Husqvarna 542i XP Operator's Manual page 18

3. Put the battery in the battery holder.
CAUTION:
battery is installed correctly into the
battery holder. If the battery does not
move easily into the battery holder, the
position is not correct.
4. Push on the lower part of the battery until you hear a
click sound.
5. Push and hold the start/stop button until the green
LED light comes on.
6. Move the front hand guard rearward to disengage
the chain brake.
To use the SavE function
The SavE function decreases the chain speed and the
power of the product.
1. Push the SavE button quickly. The green LED
comes on.
18
Make sure that the
2. Push the SavE button again to disconnect the
function. The green LED goes off.
To engage and disengage the heat in
the handles (542i XP
The product has heated handles.
• Push and hold the SavE button for 1 second to
engage the heat in the handles. The indicator for
heat in the handles comes on.
• Push the SavE button quickly to disengage the heat
in the handles. The indicator for heat in the handles
goes off.
Oil level indicator
The oil level indicator shows when it is time to fill chain
oil.
1. When the oil level indicator comes on, fill with chain
To use the correct chain oil on page 15 .
oil. Refer to
2. Start the product and wait 1-2 minutes. The oil level
indicator goes off.
To stop the product
1. Push and hold the start/stop button until the green
LED light goes off.
®
G)
2022 - 003 - 07.09.2023